Luxury Barbers London | Men's Grooming Products | Truefitt & Hill

Mayfair Shaving Soap Refill: Fitting and Bowl Care

Mayfair Shaving Soap Refill: Fitting and Bowl Care

By Luxury Barbers London | Men's Grooming Products | Truefitt & Hill | Published: 2026-11-05

Category: Tipps & Pflege

Learn how to fit the Mayfair shaving soap refill into your wooden bowl, keep the puck dry between shaves, and care for the bowl so the soap stays in good condition.

Quick answer

Press the Mayfair shaving soap refill firmly into a clean, dry wooden bowl so it sits flush, then let the bowl air-dry after each shave. Replace the puck when it no longer lathers well or sits loose in the bowl.

Why the refill needs a dry, clean bowl

A wooden bowl holds residual moisture after use. If you press a new puck into a damp bowl, trapped water can soften the base of the soap and make it shift or crumble when you load the brush. Wipe the bowl thoroughly and let it air-dry before fitting the refill.

Soap residue left in the bowl also stops the new puck from sitting flat. A quick rinse and a dry cloth are usually enough, but avoid soaking the wood, which can swell and crack over time.

When to replace the puck

Replace the Mayfair refill when the soap no longer produces a rich lather or when the remaining sliver moves around the bowl. A loose puck wastes product because the brush pushes it aside instead of loading evenly.

If you shave daily, check the puck every few weeks. The refill is designed to reduce waste by letting you keep the wooden bowl rather than buying a new one.

How to fit and care for the Mayfair refill

  1. Remove the old puck: Lift out the worn puck with your fingers or a blunt knife. If it sticks, run a little warm water around the edge of the bowl, then ease it out without scraping the wood. Never lever against the rim, which can chip the bowl.
  2. Clean and dry the bowl: Rinse the bowl with warm water and a soft cloth to remove soap film. Dry it completely with a towel and let it air-dry for an hour before fitting the refill. A damp bowl is the most common reason a new puck slips.
  3. Press the refill into place: Unwrap the Mayfair refill and centre it in the bowl. Press evenly with your thumbs or the flat of your palm until the soap sits flush against the sides and base. If the puck cracks, press the pieces back together; small cracks do not affect lather.
  4. Let the soap settle: Leave the fitted bowl open overnight so any surface moisture evaporates. Do not cover it or store it in a closed cabinet while the soap is still soft. A settled puck stays put when you load the brush.
  5. Load and shave: Wet your brush and swirl it over the soap for 20–30 seconds until the bristles pick up a creamy paste. Build the lather on your face or in a separate bowl. If the lather looks thin, load longer rather than adding more water.
  6. Dry the bowl after each use: Tip out excess water, wipe the rim, and leave the bowl open to air-dry. Store it away from direct sunlight and radiators. Standing water softens the puck and dulls the wood finish.

Product facts

  • Mayfair Shaving Soap Refill for Wooden Bowl: 100g refill designed for the Mayfair shaving soap wooden bowl. The refill lets you keep using your bowl while reducing packaging waste.
    Mayfair Shaving Soap Refill for Wooden Bowl
    Mayfair Shaving Soap Refill for Wooden Bowl

Shop Related Products

Mayfair Rasierseife Nachfüllpackung für Holzschale

Mayfair Rasierseife Nachfüllpackung für Holzschale

$18.00 $25.00

Shop Now